Hp Mu06 Notebook Battery Pinout Configuration Extra Quality Jun 2026
When working with the HP MU06 notebook battery pinout configuration, it's essential to follow proper safety procedures:
The HP MU06 features a standard recessed into the battery housing.
The standard 7-bit I2C address for Smart Battery devices is universally defined as 0x0B (or 0x16 for 8-bit write / 0x17 for 8-bit read). Safety Warnings and Risk Mitigation Hp Mu06 Notebook Battery Pinout Configuration
Because of the smart BMS safety features built into the MU06, you cannot simply place a digital multimeter (DMM) leads on Pin 1 and Pin 7 to read the voltage. If you do, your multimeter will register close to 0V.
10.8V to 11.1V (depending on the specific cell chemistry used) Charging Voltage: 12.6V maximum When working with the HP MU06 notebook battery
Typically 4400 mAh to 5200 mAh (47 Watt-hours to 57 Watt-hours)
System Management Bus (SMBus) / Smart Battery Data (SBData) The HP MU06 Pinout Configuration If you do, your multimeter will register close to 0V
: Commonly uses the Texas Instruments BQ20Z45 or Go to product viewer dialog for this item. SMBus fuel gauge.
Identify Pins 6 and 7 (typically the far-right slots when looking at the battery face-on).
Working with lithium-ion laptop batteries carries inherent risks. If you are attempting to interface with the HP MU06 pinout manually, adhere to the following safety protocols:
