Din En 13155 Pdf Exclusive |link| Official

Let me know how you would like to proceed with this material. Share public link

Any attachment that relies on friction or suction (like clamps or vacuum lifters) must have secondary safety mechanisms. For vacuum lifters, this usually involves a visual or audible warning system to alert the operator if the vacuum level drops below 80%. 3. Stability and Tilting

The equipment must not drop the load even if exposed to forces up to 3:1 (or higher depending on the specific component type) of its rated capacity. 2. Loss of Load Prevention din en 13155 pdf exclusive

Battery-powered magnets require an optical or acoustic warning device. This device monitors voltage drops. Permanent magnets must have a mechanical locking lever to prevent accidental release.

specifies the safety requirements for removable lifting devices used with cranes and hoists. The current active version is DIN EN 13155:2020 Let me know how you would like to proceed with this material

— Each attachment must be permanently marked with the manufacturer’s name, the standard designation (DIN EN 13155), the rated capacity (WLL — Working Load Limit), and a unique serial number.

Each specific unit must be tested to 1.5 times its WLL before it leaves the factory. Loss of Load Prevention Battery-powered magnets require an

: You can view free previews and tables of contents on NormSplash or BSI Knowledge to verify the contents before purchasing.

: Covers electric, permanent, and electro-permanent magnets.